top of page
Image by Theme Photos

Process

1

Power Wash

This step is crucial in removing dirt and mildew from the exterior surface of the home and providing a clean surface for the primer/paint to adhere to. At pinnacle we typically power wash with water, but in cases of severe mildew growth we apply a bleach solution for best results

2

Scraping

At this stage in the painting process we thoroughly scrape all of the loose and failing paint off the house. The scraping process is important in providing a long life span for the paint job.

3

Caulking & Glazing

After the home is cleaned of any dirt and loose paint we are ready to seal up all cracks and joints with caulk. This protects the interior of the home from moisture problems and can also save money for heating. For older homes with pane-glazed windows we reglaze them to make the home air tight.

4

Priming

The next step in the paint process is to apply a primer coat to any areas of bare wood, spackle, smoke or water damage. Primer acts similar to a double-sided glue, sticking to the bare surface while holding a finish coat on top of it.

5

Finish Coating

After the home is completely prepped we are finally ready to apply a finish coat of paint. This stage gives the home color and will make it look like new. For most older homes we recommend two coats of paint. Choosing a high quality product to coat a home with can add years on to the life of the paint job. At Pinnacle we use only the best products. Our painters are skilled and knowledgeable in the craft and can answer any additional questions you may have and we guarantee customer satisfaction.

Exterior Painting

When repainting a house, which has been coated in the past, it is essential to take every measure to ensure that the home will maintain its new look for an extended period of time. Below is the step-by-step procedure that we go through at Pinnacle to achieve this goal.

1

Tarps & Tape

Before any paint is placed on house walls, it’s important that all furniture is moved, electrical faceplates are removed, woodwork is taped off and the paint area tarped.

2

Spackling & Caulking

 After the paint area is tarped we are ready to seal up all cracks and joints with caulk. This protects the interior of the home from moisture problems and can also save money for heating. At the same time all nails pops, cracks and dents in the walls are filled with spackling paste, allowed to dry, then sanded down.

3

Priming

The next step in the paint process is to apply a primer coat to any areas of bare wood, spackle, smoke or water damage. Primer acts similar to a double-sided glue, sticking to the bare surface while holding a finish coat on top of it.

4

Finish Coating

After the home is completely prepped we are finally ready to apply a finish coat of paint. This stage gives the home color and will make it look like new. Typically for interior jobs the ceilings are painted in a flat white, the trim in a semi-gloss, and the walls in a flat or eggshell of the desired color. Kitchens, bathrooms and surfaces with high traffic tend to be coated in higher sheen paints to allow for easy cleaning.

Interior Painting

When painting the interior of a house it is essential to take every measure to ensure that the home will maintain its new look for an extended period of time. Below is the step-by-step procedure that we go through at Pinnacle to achieve this goal.

1

Power Wash

This step is crucial in removing dirt and mildew from the deck surface as well as reviving the original wood’s look. Depending on the condition of the deck, deck washing solution, stripping solution, or sanding may be needed.

2

Finish Coating

After the deck has been cleaned and has dried, it is ready to be stained. Decks can either be stained in a semi-transparent or solid color stain. With a semi-transparent stain the original wood grains can be seen through the stain. A solid stain will completely cover all of the wood grains (as well as any unwanted marks) on the deck.

Deck Wash and Staining

When staining a deck it is essential to take every measure to ensure that it will maintain its new look for an extended period of time. Below is the step-by-step procedure that we go through at Pinnacle to achieve this goal.

bottom of page